To Next PageTo Next PageHow to troubleshoot no power on my Mr. Heater 1008ST-24-102?
If your Mr. Heater Stove isn't powering on and the logs aren't glowing, ensure the power cord is securely plugged into a standard 120V outlet and that the unit is powered on.
What to do if the Mr. Heater Stove remote control does not work?
If the remote control for your Mr. Heater Stove isn't working, the first step is to replace the battery with a new one.
How to fix Error E1 on Mr. Heater 1008ST-24-102 Stove?
If Error E1 is displayed on the control panel of your Mr. Heater Stove, it indicates the overheat sensor has been engaged. To resolve this, unplug the unit and wait 15-20 minutes to allow the sensor to reset. Then, plug the unit back in and turn it on. If the problem persists, call customer service. Note that while the error is present, the heater function will be disabled, but other functions should work normally.
What does Error E2 mean on my Mr. Heater Stove and how to fix it?
Error E2 on your Mr. Heater Stove indicates that the thermostat sensor is broken or not working correctly. Try unplugging the unit and waiting 15-20 minutes for the sensor to reset. Then, plug it back in and turn on the heater. If the problem continues, contact customer service. Please note that the heater function will be disabled until the issue is resolved, though other functions should still operate normally.
Why is the Mr. Heater 1008ST-24-102 remote control signal weak?
A weak remote control signal on your Mr. Heater Stove could be due to a couple of reasons: you might be too far from the insert or at an off angle (the remote control works within 20 feet and 45 degrees from the front of the heater), or you might be pressing the buttons too quickly. Try moving closer to the insert and pressing the buttons slowly and steadily.
Why aren't the heater and blower working on my Mr. Heater 1008ST-24-102 Stove?
If the heater and blower on your Mr. Heater Stove aren't powering on, but other functions are working, it's possible the heater override function is engaged. To unlock the heater, press and hold the temperature button for 10 seconds.
What does error E3 mean on Mr. Heater 1008ST-24-102 Stove?
Error E3 on the control panel of your Mr. Heater Stove means the heater override function is engaged. To unlock the heater, simply press and hold the temperature button for 10 seconds.
How to turn on flame effect on Mr. Heater 1008ST-24-102?
If the logs on your Mr. Heater Stove are glowing but there's no flame effect, the flame effect might be powered off. Try pushing the flame brightness button until you reach the desired level.
Why does the power cord get warm on my Mr. Heater 1008ST-24-102?
It's normal for the power cord of your Mr. Heater Stove to get warm during operation, as the heater requires more current to operate. Check the connections of the appliance cord and the outlet. Make sure to check the plug and outlet frequently to determine if it is HOT; if so, discontinue use of the appliance and consult overheating outlet(s).
Why does the fan motor continue to run after I power off my Mr. Heater Stove?
The fan motor in your Mr. Heater Stove continues to run after the unit is powered off as a standard feature to cool off the heater tubes.
General| Model | 1008ST-24-102 |
|---|---|
| Category | Stove |
| Oxygen Depletion Sensor | Yes |
| Thermostat | No |
| Ignition | Piezo |
| Ventilation | Ventless |
Details FCC rules, radio frequency energy, and user corrective measures for interference.
Specifies voltage, amperage, wattage, and outlet requirements for safe operation.
Details how to properly ground the heater using adapters or grounded outlets.
Step-by-step guide for attaching legs to the heater body using screws.
How to turn the unit on/off and indicator lights.
Adjusting flame brightness and temperature increment settings.
Controlling heater thermostat, Fahrenheit/Celsius toggle, and heater function lock.
Setting the countdown timer for the unit's main power.
How settings are saved and how to reset the unit's memory.
Engaging and disengaging the heater function to prevent accidental use.
Instructions for opening the compartment and replacing the battery in the remote.
Guidelines for disposing of used batteries as non-municipal waste for recycling.
