What to do if my Mr. Induction Cooktop has no power?
First, ensure the Mr. Induction Cooktop is firmly plugged into a correct and dedicated outlet. Also, check if there was a recent power shortage. If the unit has been dropped or handled roughly, it's recommended to send it in for evaluation.
How to fix uneven cooking on Mr. Induction Cooktop?
Uneven cooking or inconsistent heat levels on your Mr. Induction Cooktop can be caused by cookware with a convex, concave, or dented base, or if the pan is smaller than 4.5” or larger than 12”. Ensure you are using flat-bottom cookware of an appropriate size and that the pan is centered.
Why does my Mr. Induction Cooktop flash 'E0' and shut off?
The Mr. Induction Cooktop flashes 'E0' and shuts off because either there is no cookware or no compatible cookware placed on the unit, the cookware may be too small or too large for the electromagnetic field, or the cookware is not centered on the ceramic plate. To resolve this, ensure compatible and appropriately sized cookware is centered on the unit.
Why does my Mr. Induction SR-964T Cooktop suddenly stop heating?
Your Mr. Induction Cooktop might stop heating due to a power shortage. Check if another appliance is drawing power from the same circuit. Also, ensure the fan is running and air vents are not blocked, providing enough clearance around the unit. If the unit was set on cook mode and idle for 2 hours, change the settings.
What does 'E5' mean on my Mr. Induction Cooktop?
The 'E5' error on your Mr. Induction Cooktop indicates a high ambient temperature, a blocked air inlet or outlet, or a non-functioning fan. Allow the unit to cool down, unblock the air inlet/outlet, and check the fan's functionality.
Why isn't my Mr. Induction SR-964T pan getting hot enough?
If your pan isn't getting hot enough on your Mr. Induction Cooktop, avoid using an extension cord over 10 feet, as it may affect performance. It is also possible that the internal coil supports may have been “dropped”, so send the unit in for repair.
What does error code 'E3' mean on Mr. Induction SR-964T and how can I fix it?
Error code 'E3' on your Mr. Induction Cooktop indicates that the cookware is being heated without any food content or the cookers have excess temperature. Place food content in the cookware or allow the unit to cool down by waiting several minutes. If error remains, contact Sunpentown.
What does 'E1' mean on Mr. Induction SR-964T Cooktop?
The 'E1' error code on your Mr. Induction Cooktop indicates that the power supply voltage is below 90V+-10V. Retry after the voltage returns to normal.
What does 'E2' mean on Mr. Induction Cooktop display?
The 'E2' error on your Mr. Induction Cooktop means that the power supply voltage is above 145V+-10V. Retry after voltage returns to normal.
Why does the fan keep running on my Mr. Induction SR-964T Cooktop after it's turned off?
The fan continuing to run after the Mr. Induction Cooktop is turned off is a safety feature designed to help preserve the life of the cooktop.
Lists essential safety rules for operating the induction cooktop, including handling hot surfaces and electrical safety.
Details the physical parts and operational panel of the induction cooktop with a diagram.
Explains how to set the cooking duration using the timer buttons, including increments and maximum time.
Guides users on choosing compatible cookware based on material, size, and magnetic properties.
Provides instructions for cleaning the cooktop and its filter to ensure longevity and performance.
Highlights crucial usage tips, safety considerations, and environmental requirements for the induction cooktop.
Lists common operational problems, their potential causes, and checks for troubleshooting.
Explains various error codes displayed by the unit and provides inspection guidance for each.
Details the terms of the product guarantee, including coverage, exclusions, and contact information.
General| Brand | Mr. Induction |
|---|---|
| Model | SR-964T |
| Category | Cooktop |
| Language | English |
To Next Page
