MRC 0001325 - User Manual

HANDHELD CONTROLLER 0001325
INSTRUCTIONS
Introduction
Thank you for purchasing our MRC handheld controller #0001325. This item is
used with the Throttle pack 9900 (#0001310) and Throttle pack 9950 (#0001320).
This handheld controller will provide walk-around capability for your DC layout.
For Your Protection
1. Never reverse a locomotive without stopping it first. To do so may
damage the locomotive motor.
2. Unplug your power supply at the end of the day’s operation.
3. Children under the age of 14 should be supervised by an adult when
operating this product.
Operation
Your power pack has a built-in jack for the handheld controller. The handheld
operates in the same way as the main unit, except it can’t set momentum. Only
the main unit can set the momentum (on or off). After adding the controller, your
layout will now have two throttles, but only one may be used at a time. You must
select either the main unit or the handheld controller to operate the throttle speed.
To select which throttle is active, press any button associated with the throttle.
Simply moving the throttle will not activate the controller. For example, if the
throttle on the main unit is currently active, and you want to switch to the
handheld, just tap the brake button on the handheld. This will make the loco
speed follow the handheld setting. Later, if you want to switch back to the throttle
on the main unit, just tap the brake button on the main unit. As a precaution, we
recommend matching the two throttle settings before making the switch, in order
to avoid the locomotive speed abruptly changing; risking damage or derailment.
Service
All M.R.C. products have been thoroughly tested before leaving our facility. If for
some reason you are having problems with any M.R.C. product, please contact our
Customer Service Department using the contact information below
This product carries a 6-month limited warranty against factory defects.
SIX MONTH LIMITED WARRANTY
Model Rectifier Corporation (MRC) will, subject to the conditions explained and set forth below,
repair at its expense, within six months from the date of sale, any component of this MRC product
which is proven defective by reason of improper workmanship or materials. MRC will repair said
component(s) without charge for necessary parts or labor. If the unit cannot be repaired, it will be
replaced with another unit or similar product of equal or greater value.

Summary

Introduction

Safety Precautions

Operation

Service and Warranty

Six Month Limited Warranty

Details the terms of the 6-month limited warranty covering defects in workmanship or materials.

Warranty Conditions

Proof of Purchase Requirement

Purchaser must retain bill of sale or sales receipt with date and dealer info for proof of purchase.

Warranty Validation

Warranty is contingent on original purchaser having an original sales receipt with product name, date, and dealer.

Warranty Exclusions

Excludes damage from misuse, shipping, accidents, cosmetic issues, and unauthorized repairs.

State-Specific Warranty Rights

Some states limit implied warranty duration or exclude incidental damages; specific legal rights may vary.

International Returns and Contact

Contact MRC for return shipping rates for international repairs and warranty claims via email or phone.

Warranty Return Process

Include sales receipt, letter with details, and fee for shipping/handling. Contact for out-of-warranty pricing.

Customer Service Contact

Contact Customer Service by phone or email for warranty policy inquiries and support.

Service Address

Send products for repair or replacement to Model Rectifier Corporation's specified Matawan, NJ address.

MRC 0001325 Specifications

General

Brand	MRC
Model	0001325
Category	Controller
Language	English