Why is the ring signal failing on all telephones connected to MRC MCX-5000A Marine Equipment?
If the ring signal is failing on all connected telephones, check the cable connector first. If the problem persists, consider replacing the switching regulator board.
Why is the fail alarm ringing continuously on my MRC MCX-5000A Marine Equipment?
If the fail alarm is continuously ringing, check the 5A fuse of the switching regulator unit.
What to do if the run lamp of MRC MCX-5000A display unit is flickering?
If the run lamp on the display unit is flickering, it could be due to a software program issue. Try pushing the reset button. If that doesn't resolve the problem, the CPU board may need to be replaced.
Highlights critical warnings about potential dangers if equipment is mishandled.
Visual representation of how the system connects to peripherals and power.
Lists programmable functions like extension editing and group call setup.
Important considerations and steps before initiating system programming.
Guides on setting dial digits, extension numbers, and trunk call methods.
Essential safety guidelines to follow before performing maintenance.
Step-by-step solutions for power, call, dial, audio, and paging malfunctions.
General| Output Power | 25W/1W |
|---|---|
| Power Supply | 13.8V DC |
| Type | VHF Marine Radio |
| Modulation | 16K0G3E |
| Frequency Range | 156.025-162.025MHz |
To Next Page
