MARINE RADIO CO.,LTD.
주/선박무선
Subject : Auto Exchanger Page : (33 / 46)
Date : 2010.10.13 Doc. : MCX-5000S_ENG_R1
(QAS-ADD-008/1/10.10.13) manual\pabx\mcx-5000S\MCX-5000S_eng.doc
(
MARINE RADIO CO., LTD.)
MRC
※You should enter "00"or "000" in order to confirm that this is last process after you complete to register
group. After you complete to register from Group2 to Group6 referring process above.
Press
key to move next process, press key to exit process.
1.5.7 Priority
When a party call is busy, as level of priority will be given to number you designate, Function of call
interrupting will be possible. (01 has lowest priority and 99 has highest priority.
high level priority -> low level priority : interrupt possible.
low level priority -> high level priority : interrupt impossible.
between same level : interrupt possible
At screen for entering number in "FUNCTION" mode. Press 07 and
key at the window, then text for PRIORITY will be displayed.
Press 99 and
key to change priority level for Address "00" from FF to 99
Enter following address level.
Press 96 and
key.
For moving to other modifying process, press
key and Press 96 and press key to exit process.
We recommend that you apply level for priority call to number you wish in accordance with table below.
Table : level for priority call
Priority call level Level Code Function Explanation
1 90
No.1 is highest level for priority call
No.5 is lowest level for priority call.
Authorization for priority call.
1) Higher level -> Lower level : Interrupt OK
2) Lower level -> Higher level : Interrupt impossible.
3) Same level : Interrupt OK
* This function will be available after fully set "priority call
function" from front LCD panel
2 70
3 50
4 30
5 10
1.5.8. USABLE (License authority for use)
Privilege "authority" to use each function
(Modify information in accordance with table for usable function.)
At screen for entering number in "FUNCTION" mode. Press 08 and
key at the window, then text for modifying usable will be displayed.
Press (
+5) key to change for privilege authority from FF to C9.
For the text(A~F) input, It is possible press the number 1~6 after shift key
(The text for entering useable for following address will be displayed.)
Press
+2, +4 and key to change from FF to BD.
Text for entering useable for following address will be displayed.
Modify everything as method above.
Press
key to move next process , press key to exit process.
PRIORITY
ADD=00 PRI=FF
PRIORITY
ADD=00 PRI=99
PRIORITY
ADD=00 PRI=96
USEABLE
ADD=00 USE=C9
USEABLE
ADD=01 USE=FF
USEABLE
ADD=01 USE=BD
USEABLE
ADD=02 USE= FE
To Next Page
Loading...