Need help?Do you have a question about the MRC MH180 and is the answer not in the manual?
General| Brand | MRC |
|---|---|
| Model | MH180 |
| Category | Test Equipment |
| Language | English |
Describes typical uses and industries for the tester.
Refers to tables in the appendix for specific testing ranges.
Details the components of the D-type impact device.
Shows various types of impact devices available for the tester.
Outlines steps for initial setup, calibration, and inspection.
Guides the user on choosing the appropriate impact device.
Details how to prepare the test sample surface for accurate results.
Instructions for powering on the instrument and starting a test.
Describes how to load the impact body before testing.
Explains how to position the impact device on the sample.
Details the procedure for conducting a hardness test.
Instructions for turning the instrument on and off.
Explains how to select the material being tested.
Procedures for cleaning and maintaining the impact device.
General maintenance guidelines for the hardness tester.
Troubleshooting guide for common faults and their solutions.
Precautions for transporting and storing the instrument.
To Next Page