9
Sliding or tilting of the unit.
Damage to the unit.
Risk of injury by lifting heavy loads.
Do not lifti or transport the unit using the door handle, the door or the lower housing.
Forbidden to raise or to carry one person, if the stove weighs more than 30 kg.
Products, which weight from 30 to 60 kg, have lift and transport two people.
Products, which weight in excess of 60 kg, lifting and transporting to be used
auxiliaries (lifts, etc.).
If you need to return, Use the original packaging for safe transportation. Dispose of the
transport packaging (See page 72).
7. ASSEMBLY
Unpack the electric Furnace and place it in the location prepared for its operation. Gently flip
the Furnace and at the bottom part (Pic.8) screw in the feet (Pic.9). Put in the bottom plate (-
es) (Pic. 10) to the chamber. Voltage specified in technical specification chart (see. p. 33) must
correspond to the rated voltage of the supply network.
Before connecting to the mains, check the serviceability of the cord, plugs and sockets with
a grounding contact. Check the serviceability of the electrical socket with the grounding
contact. Insert a plug into the socket outlet.
Do not position the furnace in a manner that would make it difficult to operate your main
power disconnect switch.
To Next Page
Loading...