Routine Operation 3-65MTX5000 User and Technical Manual
Figure 3-134: Reconfiguring Radio. Please Wait... Screen -
Typical
Preset Configuration Settings After selecting a new Preset,
the new Preset configuration settings will be displayed on the
Radio, Analog, Digital, or IP tabs, as applicable to the Preset
selected and the licensed options contained in your MTX5000
IDU.
If the Preset selected is analog, the selected Preset information
will be displayed on the Radio tab (Figure 3-135) and on the
Analog tab (Figure 3-136).
Figure 3-135: Radio Tab - Typical
Figure 3-136: Analog Tab - Typical
If the Preset selected is digital or IP, Preset information will be
displayed on the tabs applicable to the Preset selected.
To Next Page
Loading...