.
This is done to allow the camera handle to freely pass
between the spare battery and the pivot pin prior to
rotating the handle vertically under the pivot pin as in
FIGURE 8f. The camera handle is then inserted onto the
pivot pin as in FIGURE 8c and rotated downward to
engage the charging contacts in the charging nest.
.
Figure 8fFigure 8e
©MINE SAFETY APPLIANCES COMPANY 2008 ISZ001-011 P.O. BOX 427, PITTSBURGH, PA 15230
(L) REV 0 10096345
To Previous Page
Loading...
