To Next Page

To Previous Page

1 2

5 6

Hold the unit in an upright position. The Controller side facing up and the AC Power 1.

Cable side facing down. Insert the Front Stabilizer (3) into the Main Frame (4).

Attach the Front Stabilizer (3) to the Main Frame (4) with three Bolts (24) and three 2.

Spring Washers (31).

Insert the Rear Stabilizer (2) into the Main Frame (4).3.

Attach the Rear Stabilizer (2) to the Main Frame (4) with three Bolts (24) and three 4.

Spring Washers (31).

Connect the Left Foot Pedal (18) to the Left Crank (9) assembly. Thread it into the 5.

crank assembly in a counter-clockwise direction by the tool provided. (See figures

5 and 6). Connect the Right Foot Pedal (17) to the Right Crank (8) assembly by

threading it in a clockwise direction. Note: The left/right pedals and left/right cranks

are marked with with “L” and “R” (left and right).

Assembly Instructions

Questions and Answers:

Need help?

Do you have a question about the MSD Oxycycle Deluxe 2 and is the answer not in the manual?

MSD Oxycycle Deluxe 2 Specifications

General