ELECTRICITY SUPPLY
Before connecting this apparatus to the electricity supply, check the information given
on the apparatus rating plate and ensure that:
A) Your supply is single phase AC (alternating current) of the stated frequency with
the neutral nominally at earth potential.
B) Your supply voltage is within the stated range.
C) The current rating is within the capacity of your supply outlet.
D) Your plug or electricity supply circuit is fitted with a suitable fuse.
Fuse Rating 220v-240v 110v-120v
5 amp See note 100V - 120V
WARNING! This apparatus must be earthed
Your Soniprep is supplied with an IEC mains lead that will be suitable for your local
Electricity supply
NOTE: 100v-120v installations to comply with National and State Wiring Codes
IMPORTANT: Consult an electrician if in doubt or if your supply system has any
of the following:
No earth.
Reversible plugs.
Supply and return leads that are both above earth potential.
NOTE: Do not touch plug pins within two seconds of plug removal from socket.
To Next Page
Loading...