MSH Protos 700x - Page 40

box B
Instructions Manual
40
where I can nd the BIG PARTS where I can nd screws, ball bearings and u like that
box F bag C3
Hex screw
M4x10
ART. MSH71116
25mm
Remove coating with sandpaper Apply a lm of slow curing epoxy
Mount it on the model
Check the alignment and wait
glue curing
1 2 3 4
Tighten completely
Tighten completely
Hex Screw M4x16
ART. MSH71049
ART. MSH71086
Tighten completely
M4 Nut
ART. MSH71097
Tail boom brace 800 size
To be used with
800mm Main blades
ART. MSH71086
OPTIONAL
Tail boom brace 770 size
To be used with
770mm Main blades
ART. MSH71204
OPTIONAL
Tail boom brace 700 size
To be used with
700mm Main blades
ART. MSH71049