To Next PageTo Next Page
Need help?Do you have a question about the MSH Protos Carbon and is the answer not in the manual?
Essential safety guidelines for operating the helicopter, including operating locations and conditions.
Lists the necessary tools for assembling the helicopter, such as screwdrivers, pliers, and glue.
Specifies compatible servos, transmitter, receiver, gyro, and battery packs for the helicopter.
Details the parts and assembly steps for Bag-A, including screws, nuts, and bearings.
Illustrates the assembly of the guide pulley and related components from Bag-B.
Shows the attachment of carbon frame parts using various screws and washers from Bag-B.
Details securing the right carbon frame using screws, nuts, and self-tapping screws from Bag-B.
Instructions for installing the skids onto the main frame using screws and nuts from Bag-B.
Demonstrates securing components with grub screws and hex screws from Bag-B onto the frame.
Details the installation of the main shaft and belt system using parts from Bag-C.
Illustrates the assembly of swashplate components using screws, balls, and spacers from Bag-C.
Details the connection of servo linkages to the swashplate using rods and uniballs from Bag-C.
General
