MSH Protos Carbon - Tail Assembly: Bag-E Boom Attachment

Tips/Instructions
Important !!
Hex Screw
M2.5x12
MSH 50105
Hex Screw
M2.5x12
MSH 50105
Nylon Nut
M2.5
MSH 50124
M2 Nut
MSH 50123
Hex Screw
M2x10
MSH 50099
Hex Screw
M2.5x42
MSH 50109
Ball Screw
M2x4.8
MSH 50007
MSH 50074
MSH 50086
BAG-E
Do not fully tighten screws M2.5x12 yet.
When sliding boom assembly in position
make sure that the hole on the rear is
facing left when looking from behind.
13.5mm
BAG-E
Hex Screw M2.5x42
MSH 50109
Ball Screw M2x4.8
MSH 50007
Nut
M2 MSH 50123
Hex Screw M2x10
MSH 50099
Nylon Nut
M2.5
MSH 50124
25