MSH Protos Carbon - Tail Assembly: Bag-F Guide Pulley System

Tips/Instructions
Do not over tight guide pulley screw,
check that it turns freely after tightening
the screw.
BAG-F
Hex Screw
M2.5x20
MSH 50107
Hex Screw
M2.5x16
MSH 50106
Hex Screw
M2.5x20
MSH 50107
Guide Pulley Bushing
2.5x3x7.8
MSH 50019
Hex Screw
M2.5x16
MSH 50106
Pin
1.5x12
MSH 50144
Pin
1.5x12
MSH 50144
BB 3x8x3
MSH 50033
BB 5x10x4
MSH 50034
MSH 50079
MSH 50078
MSH 50073
MSH 50003
MSH 50091
MSH 50154
Nylon Nut
M2.5
MSH 50124
Nylon Nut
M2.5
MSH 50124
Washer
5x7.5x0.2
MSH 50135
Washer
5x7.5x0.2
MSH 50135
Glue together
two halves with CA
26