MSH Protos Carbon - Motor Installation: Adapter and Grub Screws

Make sure there is about 1mm gap between
bottom of motor adapter (MSH 50006)
and motor mount (MSH 50028) when
tightened in position.
!
CAUTION
Tips/Instructions
Hex Grub Screw
M3x3
MSH 50117
MSH 50006
Apply thread lock to M3x5 grub screw.
Grub Screw
M3x3
MSH 50117
Tips/Instructions
Make sure that one of the two adapter
grub screws lays on motor shaft flat spot.
34