MSH Protos Mini - Page 36

instructions manual
tail control
rod CF
MSH40067
tail control rod
tting
MSH40066
uniball hand L
MSH50092
tail boom
brace CF
MSH40062
uniball hand L
MSH50092
slow curing epoxy
slow curing epoxy
gently remove coating with sandpaper on 10mm a the end of
control rod and boom brace.
slow curing epoxy
slow curing epoxy
after the braces are in position with epoxy
tighten the 4 screw at the brace rod ends.
remember apply threadlock on the front ones.
BAG L
36