MSI 3BA0 User Manual

2-7
OSD Setup
2-6
1st Level Menu 2nd/3rd Level Menu Description
Anti Motion Blur
(OFF)
■ When Anti Motion Blur is enabled, Brightness
cannot be enabled and will be grayed out�
■ Response time will be grayed out while Anti
Motion Blur is enabled�
■ Anti Motion Blur have to set to OFF while
FreeSync is set to ON�
(ON)
Refresh Rate Location Left Top ■ Users can adjust Refresh Rate in any Mode�
■ Default Refresh Rate Location is Left Top�
Location is adjustable in OSD Menu� Press
the Middle Button to con󰘰rm and apply your
Refresh Rate Location�
■ This monitor follows and works at the
Operating System’s preset Screen Refresh
Rate�
Right Top
Left Bottom
Right Bottom
OFF
ON
Alarm Clock Location Left Top ■ Users can adjust Alarm Clock in any Mode�
■ After setting the time, press the Middle
Button to activate the timer�
■ Default Alarm Clock Location is Left Top�
Users can select their own location�
Right Top
Left Bottom
Right Bottom
OFF
15:00 00:01~99:59
30:00
45:00
60:00
Screen
Assistance
None ■ Users can adjust Screen Assistance in any
Mode�
■ Screen Assistance default is None�
Icon
Position
Reset
FreeSync
(OFF)
■ FreeSync prevents screen tearing
■ DisplayPort or HDMI default is ON and can
be adjusted ON/OFF in any mode, any
resolution, any input source and any screen
refresh rate
■ Anti Motion Blur will be disabled, if FreeSync
is enabled�
(ON)

MSI 3BA0 Specifications

General

Brand	MSI
Model	3BA0
Category	Monitor
Language	English