7
Getting Started
1
Power LED
Lit in blue after the monitor is turned on. If no signal input, the LED will turn
into flicker blue. LED goes off when the monitor is turned off.
2
Power Button & Navi Key
3
Kensington Lock
4
Power Jack
5
HDMI™ Connector
Supports 1920x1080@100Hz as specified in HDMI™ 1.4b.
6
D-Sub Port (VGA IN)
7
Line-in Jack (AUDIO IN)
The jack works with VGA-IN port as the monitor’s audio input.
8
Headphone Jack
This connector is provided for headphones or speakers.
To Next Page
Loading...
Need help?
General