MSI 785GTM-E45 - Motherboard - Micro ATX - Page 21

Hardware Setup ▍
MS-7549
2-5
Hardware Setup ▍
MS-7549
Poston the coolng set onto the re-
tenton mechansm.
Hook one end of the clp to hook
󰘰rst.
5. Then press down the other end of the
clp to fasten the coolng set on the
top of the retenton mechansm.
Locate the Fx Lever and lft up t .
6.
Fasten down the lever.7. Attach the CPU Fan cable to the CPU
fan connector on the manboard.
8.
Important
Manboard photos shown n ths secton are for demonstraton of the cooler nstal-
laton for Socket AM2+ CPUs only. The appearance of your manboard may vary
dependng on the model you purchase.
Whle dsconnectng the Safety Hook from the 󰘰xed bolt, t s necessary to keep an
eye on your 󰘰ngers, because once the Safety Hook s dsconnected from the 󰘰xed
bolt, the 󰘰xed lever wll sprng back nstantly.
•
•