MSI 785GTM-E45 - Motherboard - Micro ATX - Memory Installation

2-6
Hardware Setup ▍
MS-7549
Hardware Setup ▍
MS-7549
MeMory
These DIMM slots are used for nstallng memory modules.
For more nformaton on compatble components, please vst
http://www.ms.com/ndex.php?func=testreport
DDR2
240-pn, 1.8V
64x2=128 pn
56x2=112 pn
Dual-Channel mode Populaton Rule
In Dual-Channel mode, the memory modules can transmt and receve data wth two
data bus lnes smultaneously. Enablng Dual-Channel mode can enhance the system
performance. The followng llustratons explan the populaton rules for Dual-Channel
mode.
1
DIMM1
DIMM2
Important
DDR2 memory modules are not nterchangeable wth DDR and the DDR2 standard
s not backwards compatble. You should always nstall DDR2 memory modules n
the DDR2 DIMM slots.
In Dual-Channel mode, make sure that you nstall memory modules of the
same type
and densty n d󰘯erent channel DIMM slots.
To enable successful system boot-up, always nsert the memory modules nto the
DIMM1 󰘰rst.
•
•
•
Installed
Empty