Need help?Do you have a question about the MSI 870-C45 FX V2series and is the answer not in the manual?
General| Socket | AM3+ |
|---|---|
| Form Factor | ATX |
| Memory Slots | 4 |
| Memory Type | DDR3 |
| Max Memory | 16 GB |
| Max LAN Speed | 10/100/1000 Mbps |
| LAN Chipset | Realtek RTL8111E |
| RAID Support | RAID 0, RAID 1, RAID 10 |
If any of the following situations arises, get the equipment checked by service personnel.
DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT UNCONDITIONED, STORAGE TEMPERATURE ABOVE 60°C (140°F), IT MAY DAMAGE THE EQUIPMENT.
Visit the MSI website for technical guide, BIOS updates, driver updates, and other information.
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer.
Diagram showing the placement of various components and connectors on the motherboard.
Details on supported processors, chipsets, and HyperTransport technology.
Specifications for DDR3 memory and Realtek LAN connectivity.
Information on integrated audio and available SATA 3Gb/s ports.
List of back panel, on-board, and front panel connectors.
Details on PCIe/PCI slots, form factor, and mounting.
Descriptions of ATX power, SATA, fan, and front panel connectors.
Important notes to prevent damage to the mainboard during screw installation.
Instructions for installing the CPU and its cooler correctly for AM3+ processors.
Step-by-step guide for installing RAM modules into DIMM slots.
Important guidelines for dual-channel mode and DIMM1 installation order.
Important considerations before installing expansion cards.
Instructions and warnings for clearing the CMOS settings using the JBAT1 jumper.
Instructions on how to enter the BIOS setup utility.
Overview of primary BIOS setup sections like Standard CMOS Features and Advanced BIOS Features.
Details on M-Flash, default loading, and exit procedures.
Configuration for CPU frequency, voltage, and features.
Configuration for DRAM timings, ratios, and voltage.
Managing Spread Spectrum for EMI reduction and overclocking considerations.
How to load factory default settings for stable performance.
To Next Page