MSI 890FXA-GD70 series - Page 51

BIOS Setup
MS-7640
Chapter 3
3-7
BIOS Setup
MS-7640
Chapter 3
IDE Prmary Master/ Slave & SATA1~7 & E-SATA
Press <Enter> to enter the sub-menu, and the followng screen appears.
Devce / Vendor / Sze
It wll show the devce nformaton that you connected to the SATA connector.
Important
IDE Prmary Master/ Slave, SATA 1~7 & E-SATA are appearng when you connect the
HD devces to the IDE/ SATA/ E-SATA connectors on the manboard.
Hold on
The settng determnes whether the system wll stop f an error s detected at boot.
When the system stops for the errors preset, t wll halt on for 15 seconds and then
automatcally resume ts operaton.
[All Error] The system stops when any error s detected.
[No Error] The system does not stop for any detected error.
System Informaton
Press <Enter> to enter the sub-menu. Ths sub-menu shows the CPU nformaton, BIOS
verson and memory status of your system (read only).
▶
▶
▶
▶