MSI 890FXA-GD70 series - Page 57

BIOS Setup
MS-7640
Chapter 3
3-13
BIOS Setup
MS-7640
Chapter 3
EuP 2013
Ths Item s Desgned for Energy Usng Products Lot 6 2013 (EuP) aka Energy Related
Products (ErP). To Reduce Power Consumpton when System o󰘯 or Standby Mode.
Note: When “Enabled” EuP 2013 Settng, System Don’t Support RTC Wake Up Event
functon.
Restore On AC Power Loss
Ths tem spec󰘰es whether your system wll reboot after a power falure or nterrupt
occurs. Settngs are:
[O󰘯] Always leaves the computer n the power o󰘯 state.
[On] Always leaves the computer n the power on state.
[Last State] Restore the system to the status before power falure or nterrupt
occurred.
Wake Up Event Setup
Press <Enter> to enter the sub-menu and the followng screen appears:
Wake up Event By
Settng to [BIOS] actvates the followng 󰘰elds, and use the followng 󰘰elds to set the
wake up events. Settng to [OS], the wake up events wll be de󰘰ned by OS.
Resume S3 By USB Devce
The tem allows the actvty of the USB devce to wake up the system from S3 (Sus
-
pend to RAM) sleep state.
Resume S3/S5 By PS/2 Keyboa / Mouse
These tems determne whether the system wll be awakened from what power sav
-
ng modes when nput sgnal of the PS/2 keyboard/ mouse s detected.
Resume By PCI or PCI-E Devce
When set to [Enabled], the feature allows your system to be awakened from the
power savng modes through any event on PCIE or PCI devce.
Resume By RTC Alarm
The 󰘰eld s used to enable or dsable the feature of bootng up the system on a
scheduled tme/date.
▶
▶
▶
▶
▶
▶
▶
▶