MSI 890FXA-GD70 series User Manual

3-22
BIOS Setup
MS-7640
Chapter 3
BIOS Setup
MS-7640
Chapter 3
OC Dal Step
Ths tem s used to set value of each step when you rotate the OC dal knob.
OC Dal Reset
Select [Reset] f you need to reset the OC Dal Value.
OC Dal Value
Ths tem ndcates the overclockng value by OC dal functon. When you rotate the OC
dal knob, ths value wll change.
OC Dal Adjusted FSB Clock (MHz)
It shows the adjusted FSB clock by OC Dal functon (FSB Clock +OC Dal Value).
Read-only.
MEMORY-Z
Press <Enter> to enter the sub-menu.
DIMM1~4 Memory SPD Informaton
Press <Enter> to enter the sub-menu. The sub-menu dsplays the nformaton of
nstalled memory.
Advance DRAM Con󰘰guraton
Press <Enter> to enter the sub-menu and the followng screen appears.
DRAM Tmng Mode
Ths 󰘰eld has the capacty to automatcally detect all of the DRAM tmng.
1T/2T Memory Tmng
Ths tem controls the SDRAM command rate. Select [1T] makes SDRAM sgnal
controller to run at 1T (T=clock cycles) rate. Selectng [2T] makes SDRAM sgnal
controller run at 2T rate.
DCT Unganged Mode
Ths feature s used to Integrate two 64-bt DCTs nto a 128-bt nterface.
Bank Interleavng
Bank Interleavng s an mportant parameter for mprovng overclockng capablty of
memory. It allows system to access multple banks smultaneously.
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶

MSI 890FXA-GD70 series Specifications

General

Brand	MSI
Model	890FXA-GD70 series
Category	Motherboard
Language	English