MSI 890GXM-G65 series - Page 47

BIOS Setup ▍
MS-7642
3-7
BIOS Setup ▍
MS-7642
IDE Prmary Master/ Slave & SATA1~5 & E-SATA
Press <Enter> to enter the sub-menu, and the followng screen appears.
Devce / Vendor / Sze
It wll show the devce nformaton that you connected to the SATA connector.
LBA/Large Mode
Ths allows you to enable or dsable the LBA Mode. Settng to Auto enables LBA
mode f the devce supports t and the devces s not already formatted wth LBA
mode dsabled.
DMA Mode
Select DMA Mode.
Hard Dsk S.M.A.R.T.
Ths allows you to actvate the S.M.A.R.T. (Self-Montorng Analyss & Reportng
Technology) capablty for the hard dsks. S.M.A.R.T s a utlty that montors your
dsk status to predct hard dsk falure. Ths gves you an opportunty to move data
from a hard dsk that s gong to fal to a safe place before the hard dsk becomes
o󰘳ne.
Important
IDE Prmary Master/ Slave, SATA 1~5 & E-SATA are appearng when you connect the
HD devces to the IDE/ SATA/ E-SATA connectors on the manboard.
Hold on
The settng determnes whether the system wll stop f an error s detected at boot.
When the system stops for the errors preset, t wll halt on for 15 seconds and then
automatcally resume ts operaton.
[All Error] The system stops when any error s detected.
[No Error] The system does not stop for any detected error.
System Informaton
Press <Enter> to enter the sub-menu. Ths sub-menu shows the CPU nformaton, BIOS
verson and memory status of your system (read only).
▶
▶
▶
▶
▶
▶
▶