14
Overview of Components
JCOM1, JCOM2: Serial Port Connectors
These connectors allow you to connect the optional serial ports with the bracket.
1
2 10
9
1 DCD 2 SIN
3 SOUT 4 DTR
5 Ground 6 DSR
7 RTS 8 CTS
9 RI 10 No Pin
JLED1: LED connector
These connectors allow you to connect the 5050 LED strips.
Important
y
This connector supports 5050 single-color LED strips with the maximum power
rating of 3A (12V). Please keeping the LED strip shorter than 2 meters to prevent
dimming.
y
Always turn off the power supply and unplug the power cord from the power outlet
before installing or removing the LED strip.
y
Please use MSIs software to control the extended LED strip.
1
JLED1
Extension cable
5050 LED strip
1
1 +12V 2 NC
3 Signal 4 NC
To Next Page
Loading...
