English
29
CPU Memory Changed Detect [Enabled]
Enables or disables the system to issue a warning message during boot when the
CPU or memory has been replaced.
[Enabled] The system will issue a warning message during boot and than
needs to load the default settings for new devices.
[Disabled] Disables this function and keeps the current BIOS settings.
OC Retry Count
every time, the system will restore the defaults.
[1], [2], [3] Retry 1,2,3 times.
[Disabled] Disables this function and keeps the current BIOS settings.
installed CPU. You can also access this information menu at any time by pressing
[F4]. Read only.
CPU Technology Support
features does the installed CPU support. Read only.
MEMORY-Z
timings of installed memory. You can also access this information menu at any time
by pressing [F5].
DIMM1~X Memory SPD
installed memory. Read only.
CPU Features
AMD Cool’n’Quiet [Auto]
Enabled or disabled AMD Cool’n’Quiet function.
[Auto] Depends on AMD Design.
[Enable] Enables AMD Cool’n’Quiet function. The Cool’n’Quiet
and power consumption.
[Disabled] Disables this function.
Important
When adjust CPU Ratio then Cool’n’Quiet function will be disabled automatically. For
CPU which supports the Turbo Core Tech., please set AMD Turbo Core Technology
and AMD Cool’n’Quiet as Disabled to retain the default CPU core speed.
To Next Page
Loading...
Need help?
General
