MSI A88X-G45 - APU Cooler Installation Steps

Chapter 1
1-13 Getting Started
5. Locate the APU fan connector on the motherboard.
6. Position the cooling set onto the retention mechanism. Hook one end of the clip to
hook 󰘰rst.
Important
While disconnecting the Safety Hook from the 󰘰xed bolt, it is necessary to keep an
eye on your 󰘰ngers, because once the Safety Hook is disconnected from the 󰘰xed
bolt, the 󰘰xed lever will spring back instantly.
Con󰘰rm that the APU cooler has formed a tight seal with the APU before booting
your system.
Please refer to the documentation in the APU cooler package for more details about
APU cooler installation.
•
•
•
APU fan connector
7. Then press down the other end of the clip to fasten the cooling set on the top of
the retention mechanism. Locate the Fix Lever and lift up it.
8. Fasten down the lever.
9. Attach the APU Fan cable to the APU fan connector on the motherboard.