MSI A88XI AC - Page 43

English
En-29
CPU Core Control [Auto]
Change the number of CPU Core in the system. If set to "Auto", the CPU will operate
under the default number of cores. [Options: Auto, One core per processor(Core 0
Only), One core per processor(Core 2 Only), One Compute Unit(Core 0 & 1), One
Compute Unit(Core 2 & 3), One core per Compute Unit(Core 0 & 2)]
AMD Turbo Core Technology [Auto]
Based on AMD Turbo Core Technology, part of CPU core ratio may pop down for
providing more performance headroom for active CPU core, even AMD Cool’n’Quiet
Technology is Disabled.
[Auto] Turbo Core Technology will linked to AMD Cool’n’Quiet Technology.
[Enabled] Enables this function.
[Disabled] Disables this function.
Adjust Turbo Core Ratio [Auto]
Speci󰘰es the Turbo Core frequency multiplier.
Adjusted Turbo Core Frequency
Shows the adjusted Turbo Core frequency. Read-only.
Adjust GPU Engine Frequency [Auto]
Adjust GPU Engine Frequency.
Adjusted GPU Engine Frequency
Shows the adjusted GPU Engine frequency. Read-only.
DRAM Frequency [Auto]
Sets the DRAM frequency. Please note the overclocking behavior is not guaranteed.
Adjusted DRAM Frequency
Shows the adjusted DRAM frequency. Read-only.
Intel Extreme Memory Pro󰘰le (XMP) [Disabled]
X.M.P. (Extreme Memory Pro󰘰le) is the overclocking technology by memory module.
This item will be available when you install the memory modules that support X.M.P.
technology. When the Intel Extreme Memory Pro󰘰le (XMP) is Enabled, the AMD Memory
Pro󰘰le (AMP) will be forced to be disabled.
[Disabled] Disables this function.
[Enabled] Choose to apply an Intel Extreme Memory Pro󰘰le (XMP) to increase sys
-
tem performance.
DRAM Timing Mode [Auto]
Selects the memory timing mode.
[Auto] DRAM timings will be determined based on SPD (Serial Presence De
-
tect) of installed memory modules.
[Link] Allows user to con󰘰gure the DRAM timing manually for all memory chan
-
nel.
[UnLink] Allows user to con󰘰gure the DRAM timing manually for respective mem
-
ory channel.
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶