Killer Network Manager
The Killer Network Manager software installs with the Killer LAN driver. Once
installed, the Killer Network Manager icon shows on system tray (the right bottom
corner of the screen). Mouse right click on the tray icon to show the application
window.
In case no icon is shown on the system tray, it is possible to activate Killer Network
Manager manually by clicking Start > Programs > MSI > Killer Network Manager.
y Applications - displays currently using network bandwidth applications.
y Performance - shows top 5 applications by total traffic, allows you to monitor
network bandwidth usage.
y Network - allows you to setup bandwidth.
y Killer Ethernet - shows your ethernet setting information.
Configuring Bandwidth
Before using the Killer network for the first time, you should configure default Internet
upload and download speed.
To configure bandwidth:
1. Select the Network block in Killer Network Manager.
2. Enter a value into the Upload Speed field.
3. Enter a value into the Download Speed field.
4. Check Enable Bandwidth Control to allow the Killer Network Manager to manage
the bandwidth.
To Next Page
Loading...
