88
RAID Configuration (optional)
Using Intel
®
Rapid Storage Technology in UEFI BIOS
To enable the UEFI mode:
1. Go to BIOS > SETTING > Advanced > Windows OS Configuration.
2. Set Windows 10 WHQL Support to Enabled.
3. Press F10 to save and exit.
Creating RAID Volume
1. Go to BIOS > SETTING > Advanced > Intel(R) Rapid Storage Technology.
2. Enter Create RAID Volume screen. The following screen appears:
3. Specify a Name for RAID volume.
4. Select the RAID Level best suited to your usage model in RAID Level.
5. In the Select Disks field, press Enter key and use the ↑↓ arrow keys to select
the option X to select the disks you want to create for the RAID volume.
6. Select the Strip Size for the RAID array. The available values range from 4KB to
128 KB in power of 2 increments. The strip size should be chosen based on the
planned drive usage. Here are some typical values:
RAID0 -128KB / RAID10 - 64KB / RAID5 - 64KB.
7. Select the capacity of the volume in the Capacity (MB) field. The default value is
To Next Page
Loading...
