To Next PageTo Next Page
Need help?Do you have a question about the MSI B450M BAZOOKA PLUS and is the answer not in the manual?
General| Form Factor | Micro ATX |
|---|---|
| Chipset | AMD B450 |
| CPU Socket | AM4 |
| Memory Support | DDR4 |
| Memory Slots | 4 |
| Max Memory | 64 GB |
| Audio | Realtek ALC892 Codec |
| LAN | Realtek 8111H Gigabit LAN |
| RAID Support | RAID 0, 1, 10 |
| Storage Interface | 4 x SATA 6Gb/s, 1 x M.2 |
| USB Ports | 6 x USB 2.0 |
| Memory Speed | Up to 3466+ MHz (OC) |
| PCIe Slots | 1 x PCIe 3.0 x16, 1 x PCIe 2.0 x1 |
Details the CPU specifications for the motherboard, including compatibility and features.
Provides information on the AMD B450 Chipset, its features and capabilities.
Lists memory support, including DDR4 slot count, capacity, and speeds.
Details the available PCIe expansion slots, their versions, and lane configurations.
Specifies the onboard graphics ports and their maximum resolutions and refresh rates.
Outlines the storage interfaces supported, including SATA and M.2 slots.
Describes RAID support for SATA storage devices, including supported RAID levels.
Explains the status and speed indicators for the LAN port LEDs.
Introduces the Realtek Audio Console for managing sound settings and audio configurations.
Provides an introduction to the AM4 CPU and its alignment features for installation.
Highlights critical safety precautions and important notes for installing the CPU and heatsink.
Offers guidance and recommendations for installing memory modules into the DIMM slots.
Provides important safety tips and considerations for memory module installation and compatibility.
Details the pin assignments and connections for front panel switches and LEDs.
Step-by-step instructions for installing an M.2 SSD into the M.2 slot.
Explains the connection for front panel audio jacks and its pinout.
Details the pinout and function of the 4-pin CPU power connector.
Details the pinout and function of the 24-pin ATX power connector.
Highlights the importance of secure power cable connections for stable motherboard operation.
Explains the pinout for USB 2.0 front panel connectors and connection safety.
Details the pinout for USB 3.1 Gen1 front panel connectors and connection safety.
Emphasizes correct connection of VCC and Ground pins to prevent potential damage.
Describes PWM and DC fan connectors, their pin definitions, and modes.
Details the pinout for the optional serial port connector.
Provides advice on switching fan modes and ensuring proper fan operation.
Details the SATA 6Gb/s interface ports for connecting SATA devices.
Explains the pinout for the optional parallel port connector.
Offers important recommendations for handling SATA cables to prevent data loss.
Instructions on how to connect and enable the chassis intrusion detection feature.
Steps to reset the chassis intrusion warning message within the BIOS.
Information on the TPM module connector and its purpose for security.
Describes how to connect 5050 RGB LED strips to JRGB1/JRGB2 connectors.
Explains the meaning of the EZ Debug LEDs for motherboard status and troubleshooting.
Provides instructions for resetting BIOS settings to default values using the jumper.
Explains how to access the BIOS setup utility using specific function keys.
Methods to restore default BIOS settings to resolve potential issues.
Details methods for updating BIOS: M-FLASH, Live Update 6, and Flash BIOS Button.
Overview of the EZ Mode interface, navigation elements, and basic system information.
Overview of the Advanced Mode interface and its comprehensive BIOS configuration options.
Detailed settings for overclocking CPU, Memory, and managing voltages/protection.
Accessing CPU specifications, technology support, and system information within BIOS.
Configuration of advanced CPU features, power management, and I/O virtualization.
Step-by-step guide for installing the Windows 10 operating system on the computer.
Instructions for installing essential system drivers from the provided disc or online.
Guide for installing additional software utilities to enhance system functionality.
Details compliance with FCC rules for digital devices and potential interference.
Information regarding the proper disposal and recycling of batteries.
Information on chemical substances in products, relating to REACH regulations.
MSI's commitment to environmental protection, product reuse, and recycling.
Statement regarding Waste Electrical and Electronic Equipment disposal according to EU directive.
Information regarding product copyright, ownership, and revision history of the document.
Guidance on how to get technical support, contact distributors, or visit the MSI website.
