MSI G272QPF E2 User Manual

4
Installing the Monitor Stand
1. Leave the monitor in its protective foam packaging. Align the stand bracket to the
monitor groove.
2. Tighten the stand bracket with screws.
3. Connect the base to the stand and tighten the base screw to secure the base.
4. Make sure the stand assembly is properly installed before setting the monitor
upright.
1
2
3
⚠
Important
∙ Place the monitor on a soft, protected surface to avoid scratching the display panel.
∙ Do not use any sharp objects on the panel.
∙ The groove for installing the stand bracket can also be used for wall mount. Please
contact your dealer for proper wall mount kit.
∙ This product comes with NO protective film to be removed by the user! Any
mechanical damages to the product including removal of the polarizing film may
affect the warranty!

MSI G272QPF E2 Specifications

General

Screen Size	27 inches
Resolution	2560 x 1440 (QHD)
Panel Type	IPS
Response Time	1ms (GtG)
Brightness	300 nits
Contrast Ratio	1000:1
Display Colors	16.7 million
VESA Mounting	100 x 100 mm
Viewing Angle	178° (H) / 178° (V)
Adaptive Sync	FreeSync Premium
Connectivity	2x HDMI 2.0