EasyManuals Logo

MSI G27C3F User Manual

MSI G27C3F
26 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #21 background imageLoading...
Page #21 background image
Safety Instructions
Read the safety instructions carefully and thoroughly.
All cautions and warnings on the device or User Guide should be noted.
Refer servicing to qualified personnel only.
Power
Make sure that the power voltage is within its safety range and has been adjusted
properly to the value of 100~240V before connecting the device to the power outlet.
If the power cord comes with a 3-pin plug, do not disable the protective earth pin
from the plug. The device must be connected to an earthed mains socket-outlet.
Please confirm the power distribution system in the installation site shall provide
the circuit breaker rated 120/240V, 20A (maximum).
Always disconnect the power cord or switch the wall socket off if the device would
be left unused for a certain time to achieve zero energy consumption.
Place the power cord in a way that people are unlikely to step on it. Do not place
anything on the power cord.
If this device comes with an adapter, use only the MSI provided AC adapter approved
for use with this device.
Environment
To reduce the possibility of heat-related injuries or of overheating the device, do not
place the device on a soft, unsteady surface or obstruct its air ventilators.
Use this device only on a hard, flat and steady surface.
To prevent the device from tipping over, secure the device to a desk, wall or fixed
object with an anti-tip fastener that helps to properly support the device and keep it
safe in place.
To prevent fire or shock hazard, keep this device away from humidity and high
temperature.
Do not leave the device in an unconditioned environment with a storage temperature
above 60℃ or below -20℃, which may damage the device.
The maximum operating temperature is around 40℃.
When cleaning the device, be sure to remove the power plug. Use a piece of soft
cloth rather than industrial chemical to clean the device. Never pour any liquid into
the opening; that could damage the device or cause electric shock.
Always keep strong magnetic or electrical objects away from the device.
21

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the MSI G27C3F and is the answer not in the manual?

MSI G27C3F Specifications

General IconGeneral
3DNo
Panel typeVA
Color gamut117 %
Pixel pitch0.3114 x 0.3114 mm
Display diagonal27 \
Screen curvature1800 mm
Display technologyLCD
Native aspect ratio16:9
Vertical scan range48 - 180 Hz
Maximum refresh rate180 Hz
Screen curvature rating1800R
Viewable size, vertical336.312 mm
Contrast ratio (dynamic)100000000:1
Contrast ratio (typical)3000:1
Display number of colors16.7 million colors
Viewable size, horizontal597.888 mm
Display brightness (typical)300 cd/m²
Supported graphics resolutions1920 x 1080 (HD 1080)
Headphone out-
DisplayPort version1.2a
VGA (D-Sub) ports quantity0
Input current3 A
AC input voltage100 - 240 V
AC input frequency50/60 Hz
Power consumption (off)0.5 W
AC adapter output voltage12 V
Power consumption (standby)- W
Tilt angle range-5 - 20 °
Cable lock slot typeKensington
Panel mounting interface75 x 75 mm
Feet colorBlack
Market positioningGaming
Package typeBox
Package weight6220 g
Weight and Dimensions IconWeight and Dimensions
Depth (with stand)215.6 mm
Height (with stand)458 mm
Weight (with stand)4400 g
Depth (without stand)99 mm
Width (without stand)611.5 mm
Height (without stand)364 mm
Weight (without stand)3750 g

Related product manuals