11
OSD Menus
1st Level Menu 2nd/3rd Level Menu Description
Response Time Normal ∙ Activating the following functions will
affect Response Time:
Activated Function
Response Time Status
» MPRT Sync
» PIP/PBP
Unable to select
Fast
Fastest
MPRT Sync OFF ∙ Activating MPRT Sync will affect:
Affected Function Function Status
» Response Time
» Brightness
Unable to select
» HDCR
» PIP/PBP
» Optix Scope
Set to OFF
» Screen Size 1:1
Set to Auto
» Type C PD Charge
Set to OFF &
unable to select
∙ MPRT Sync is available when the
refresh rate is over 85Hz.
ON
Refresh Rate Location Left Top ∙ Location is adjustable in OSD Menu.
Press the OK Button to confirm and
apply your Refresh Rate Location.
∙ This monitor follows and works at the
Operating System’s preset Screen
Refresh Rate.
Right Top
Left Bottom
Right Bottom
Customize
OFF
ON
Alarm Clock Location Left Top ∙ After setting the time, press the OK
Button to activate the timer.
∙ Users have to manually restore their
preset Alarm Clock after any AC
power loss and reconnection.
Right Top
Left Bottom
Right Bottom
Customize
OFF
15:00 00:01 ~ 99:59
30:00
45:00
60:00
To Next Page
Loading...
