Do you have a question about the MSI GF615M and is the answer not in the manual?
Memory Slots | 2 |
---|---|
Form Factor | Micro ATX |
Expansion Slots | 1 x PCIe x16, 1 x PCIe x1 |
Storage | 4 x SATA |
USB Ports | 2x USB 2.0 |
LAN | Realtek |
States that modifications not approved by the party responsible for compliance could void user authority.
Specifies that shielded interface cables and AC power cords must be used for emission limits.
Intellectual property notice from Micro-Star International regarding document content.
Lists registered trademarks owned by various companies relevant to the product.
Details the version history of the manual with dates and changes.
Provides essential safety advice for handling and operating the equipment.
Warns about explosion danger if battery is replaced incorrectly.
Visual representation of the motherboard with labeled components and connectors.
Details supported CPUs, NVIDIA chipset, HyperTransport, and DDR3 memory specifications.
Lists connectors, slots, form factor, and mounting details for the motherboard.
Description of all ports and connectors found on the rear of the motherboard.
Step-by-step instructions for installing the CPU and its cooling solution.
Guide on how to correctly install DDR3 memory modules into the DIMM slots.
Details on ATX power connectors (JPWR1, JPWR2) and the Floppy Disk Drive connector (FDD1).
Details IDE, SATA, and Fan power connectors (CPUFAN, SYSFAN1).
Describes S/PDIF, CD-In, Front Panel I/O, and Front Panel Audio connectors.
Details Front USB, TPM, Chassis Intrusion, and APS LED connectors.
Instructions for Clear CMOS jumper and Overclock FSB switch settings.
Information on PCI Express and PCI slots, including interrupt request routing.
How to enter the BIOS Setup Utility and navigate its main menus.
Detailed explanations of key BIOS setup menu items.
Settings related to AMD Cool'n'Quiet technology and DRAM timing adjustments.
Configuration for FSB, voltages, spread spectrum, and other system parameters.
Procedure for restoring BIOS to factory default settings for stability.