Preface
1-101
101
Create and Burn a Recovery Disk
1. To create and burn a Recovery Disk, select [Recovery Disk], and then follow the
on-screen instructions to continue.
2. Prepare the number of the writable disk as requested.
3. Place the disk into the optical drive device, and then select [Burn].
4. Note: Closing the other applications while burning the recovery disk is suggested.
5. Click [Close] when a disk is successfully created.
6. Click [Next] to continue the procedure of creating and burning recovery disks.
7. Exchange and place the rest disks into the optical drive device as instructed.
8. All recovery disks created and burned successfully.
To Next Page
Loading...
