SoftwareApplicationManual
94
MSI Battery Calibration
When the MSI Battery Calibration application has been installed
successfully, the Battery Calibration launch icon will appear in the MSI
folder of the Start menu. Click on this icon to launch the Battery
Calibration application. It is recommended to go through the Battery
Calibration process every 3 months to have the best battery life.
Starting the Battery Calibration Process
1. Left click on the Battery Calibration launch icon in the MSI folder of the Start menu, and
the Battery Calibration main display will appear.
2. If you are using the Battery Calibration process for the very first time, there will be no date
information for the last calibration shown on the Stats field.
3. Before starting the Battery Calibration process, it is required to check that the following
conditions:
a. The AC/DC adapter must be connected.
b. The battery must be installed properly.
c. No any other application is activated.
A red signal will appear, if any condition listed above does not meet the requirement.
4. Left click on the “Start” icon to start the Battery Calibration process.
To Next Page
Loading...
