MSI H55-GD65 Series

Hardware Setup ▍
MS-7637
2-25
Hardware Setup ▍
MS-7637
Mult-GPU Technology
Ths manaobrd supports Mult-GPU technology, t allows two GPUs to run n tandem
wthn a system to acheve up to twce the performance of a sngle graphcs card. To
utlze ths technology, the two GPU cards must be connected by an Mult-GPU Lnk
card.
Mult-GPU Lnk Card (optonal)
If you ntend to use the Mult-GPU mode for better graphcs performance, please refer
to the followng nstructons.
Install two graphcs cards on PCI Express x16 slots. Wth two cards nstalled, an
Mult-GPU Lnk Card s requred to connect the golden 󰘰ngers on the top of these
two graphcs cards (refer to the pcture below). Please note that although you have
nstalled two graphcs cards, only the vdeo outputs on the 󰘰rst card wll work.
Hence, you only need to connect a montor to the 󰘰rst PCI Express card.
1.
Mult-GPU Lnk Card
Important
If you ntend to nstall TWO x16 graphcs cards, make sure that these two graphcs
cards are of the same brand and spec󰘰catons.
Make sure that you connect an adequate power supply to the JPWR2 connector
(or to the power connector on the graphcs card) to ensure stable operaton of the
graphcs card.
If you ntend to nstall only ONE graphcs card, make sure that the graphcs card s
Installed on the 󰘰rst PCIE x16 slot.
•
•
•