Need help?Do you have a question about the MSI H55M-E33 series and is the answer not in the manual?
General| Form Factor | Micro ATX |
|---|---|
| Socket Type | LGA 1156 |
| Chipset | Intel H55 |
| Memory Type | DDR3 |
| Maximum Memory | 16GB |
| Memory Slots | 4 |
| PCI Express x16 | 1 |
| PCI Slots | 1 |
| SATA 3Gb/s | 6 |
| USB 2.0 Ports | 10 |
| Memory Standard | DDR3 1066/1333 |
| LAN | Realtek 8111DL Gigabit LAN |
| Video Outputs | DVI-D |
Intellectual property notice for document contents.
List of registered trademarks and their owners.
Details of document revisions and release dates.
Information on obtaining help and support for the product.
Important guidelines for safe operation and handling of the equipment.
Notes on environmental protection and battery disposal safety.
Statement on compliance with FCC regulations for radio frequency interference.
Important notices regarding compliance and cable usage.
Statement regarding the disposal of electrical and electronic equipment.
Details on CPU, chipset, memory, LAN, and audio features.
Specifications for SATA, IDE, and optional interfaces.
Lists back panel and on-board connectors.
Description of connectors on the mainboard's back panel.
Description of connectors present directly on the mainboard.
Details on CD-In, S/PDIF, TPM, Parallel, and Serial connectors.
Details on PCI Express and PCI slots available on the motherboard.
Physical dimensions and mounting hole specifications.
Visual guide to the location of key components on the mainboard.
Key aspects like overheating, replacement, and overclocking.
Visual guide to identifying CPU orientation and thermal paste application.
Steps 1-4 for installing the CPU and cooler.
Steps 5-8 for installing the CPU and cooler, and important notes.
Steps 9-12 for installing the CPU and cooler, and fan connection.
Guidelines for installing memory modules for Dual-Channel mode.
Step-by-step guide for installing memory modules into DIMM slots.
Description of ATX 24-pin and 4-pin power supply connectors.
Recommendations for stable operation and power supply wattage.
Diagrams of back panel ports for H55M-E33 and H55M-P31.
Descriptions of Mouse/Keyboard, USB, and LAN ports.
Descriptions of VGA, HDMI, DVI, and audio ports.
Connectors for IDE devices and chassis intrusion detection.
Connectors for Serial ATA devices and serial communication.
Connectors for system fans and front panel switches/LEDs.
Connectors for USB peripherals and external audio input.
Connectors for digital audio and parallel port devices.
Connectors for front panel audio and Trusted Platform Module.
Jumper to clear CMOS RAM for system configuration reset.
Switch for adjusting processor frequency and overclocking.
Details on PCI Express and PCI slots available on the motherboard.
Table showing IRQ routing for PCI slots.
Indicates the current CPU power phase mode.
General information on BIOS Setup and its version naming convention.
Instructions on how to enter the BIOS Setup utility.
How to navigate menus and access online help within BIOS Setup.
Basic and advanced system configurations in BIOS.
Settings for integrated peripherals and power management.
Options for hardware monitoring, green power, and BIOS password.
Settings for overclocking, M-Flash, and profile management.
Options to save or discard changes and exit BIOS setup.
Procedure to load optimized default settings in BIOS.
How to adjust system date and time in BIOS.
Procedure to save configuration changes and exit BIOS setup.
Introduction to the Cell Menu for advanced users and overclocking.
Information on installed CPU and its features.
Details on Intel SpeedStep and C-STATE power management.
Features like C1E Support, OverSpeed Protection, and Execute Bit Support.
Explanation of Hyper-Threading technology requirements and benefits.
Settings for CPU base frequency, OC stepping, and ratio adjustment.
Settings for Intel Virtualization and CPUID limits.
Enables or disables the Auto OverClock function.
Controls DRAM timing via SPD or manual configuration.
Details on CAS Latency, tRCD, tRP, tRAS, tRFC, tWR, tWTR.
Details on tRRD, tRTP, tFAW, and advanced memory settings.
Settings for memory multiplier, QPI multiplier, and frequencies.
Settings for clock amplitudes, PCI-E frequency, and EMI reduction.
Guidance on using Spread Spectrum for EMI reduction and system stability.
Methods to recover from failed overclocking, including reboot and CMOS clear.
Information on drivers, utilities, and websites included on the DVD.
Recommendation to visit MSI website for latest drivers and BIOS.
To Next Page
