En-14
MS-7636 Manboard
▍
connectorS
IDE Connector: IDE1 (optonal)
Ths connector supports IDE hard dsk drves, optcal dsk drves and other IDE de-
vces.
Important
If you nstall two IDE devces on the same cable, you must congure the drves sepa-
rately to master / slave mode by settng jumpers. Refer to IDE devce’s documentaton
suppled by the vendors for jumper settng nstructons.
Chasss Intruson Connector: JCI1
Ths connector connects to the chasss ntruson swtch cable. If the chasss s opened,
the chasss ntruson mechansm wll be actvated. The system wll record ths status
and show a warnng message on the screen. To clear the warnng, you must enter the
BIOS utlty and clear the record.