MSI H55-GD65 Series - System Information and Error Handling

BIOS Setup ▍
MS-7637
3-7
BIOS Setup ▍
MS-7637
SATA1~7 & IDE Prmary Master/ Slave & E-SATA1
Press <Enter> to enter the sub-menu and the followng screen appears:
Devce / Vendor / Sze
It wll show the devce nformaton that you connected to the IDE/ SATA/ ESATA
connector.
Important
SATA1~7 & IDE Prmary Master/ Slave & E-SATA1 are appearng when you connect
the HD devces to the IDE/ SATA/ E-SATA connectors on the manboard.
Hold on
The settng determnes whether the system wll stop of an error s detected at boot.
When the system stops of the errors preset, t wll halt on for 15 seconds and then au
-
tomatcally resume ts operaton. Avalable optons are:
[All Error] The system stops when any error s detected.
[No Error] The system doesn’t stop for any detected error.
System Informaton
Press <Enter> to enter the sub-menu, and the followng screen appears.
Ths sub-menu shows the CPU nformaton, BIOS verson and memory status of your
system (read only).
▶
▶
▶
▶