MSI H55-GD65 Series - Wake Up Event Configuration

BIOS Setup ▍
MS-7637
3-13
BIOS Setup ▍
MS-7637
Restore On AC Power Loss
Ths tem spec󰘰es whether your system wll reboot after a power falure or nterrupt
occurs. Settngs are:
[O󰘯] Always leaves the computer n the power o󰘯 state.
[On] Always leaves the computer n the power on state.
[Last State] Restore the system to the status before power falure or nterrupt
occurred.
Wake Up Event Setup
Press <Enter> and the followng sub-menu appears.
Wake up Event By
Settng to [BIOS] actvates the followng 󰘰elds, and use the followng 󰘰elds to set the
wake up events. Settng to [OS], the wake up events wll be de󰘰ned by OS.
Resume From S3 By USB Devce
The tem allows the actvty of the USB devce to wake up the system from S3 (Sus
-
pend to RAM) sleep state.
Resume From S3 By PS/2 Keyboard / Mouse
These tems determne whether the system wll be awakened from what power sav
-
ng modes when nput sgnal of the PS/2 keyboard/ mouse s detected.
Resume By PCI Devce (PME#)
When set to [Enabled], the feature allows your system to be awakened from the
power savng modes through any event on PME (Power Management Event).
Resume By PCI-E Devce
When set to [Enabled], the feature allows your system to be awakened from the
power savng modes through any event on PCIE devce.
Resume By RTC Alarm
The 󰘰eld s used to enable or dsable the feature of bootng up the system on a
scheduled tme/date.
Date/Tme (HH:MM:SS)
If Resume By RTC Alarm s set to [Enabled], the system wll automatcally resume
(boot up) on a spec󰘰c date/hour/mnute/second spec󰘰ed n these 󰘰elds (usng the
<+> and <-> to select the date & tme settngs). Avalable settngs for each tem
are:
[Date] 01 ~ 31, Every Day
[Tme (HH:MM:SS)] 00 ~ 23 : 00 ~ 59 : 00 ~ 59
▶
▶
▶
▶
▶
▶
▶
▶
▶