MSI H55-GD65 Series - Failed Overclocking Resolution

3-24
BIOS Setup ▍
MS-7637
BIOS Setup ▍
MS-7637
Important
Faled Overclockng Resoluton
Ths manboard supports overclockng greatly. However, please make sure your pe
-
rpherals and components are bearable for some specal settngs. Any operaton that
exceeds product spec󰘰caton s not recommended. Any rsk or damge resultng from
mproper operaton wll not be under our product warranty.
Two ways to save your system from faled overclockng...
Reboot
Press the Power button to reboot the system three tmes. Please note that, to avod
electrc current to a󰘯ect other devces or components, we suggest an nterval of more
than 10 seconds among the reboot actons.
At the fourth reboot, BIOS wll determne that the prevous overclockng s faled and
restore the default settngs automatcally. Please press any key to boot the system
normally when the followng message appears on screen.
Warnng !!! The prevous overclockng had faled,
and system wll restore ts defaults settng,
Press any key to contnue.......
Clear CMOS
Please refer to “Chapter 2” for more nformaton about how to clear CMOS data.
•
•