EasyManuals Logo

MSI K9N SLI V2 Series User Manual

MSI K9N SLI V2 Series
111 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #34 background imageLoading...
Page #34 background image
2-20
MS-7390 Mainboard
If you intend to use the SLI mode for better graphics performance, please refer to the
following instructions.
1. Install two graphics cards on PCI Express x16 slots. With two cards installed, an
SLI Video Link Card is required to connect the golden fingers on the top of these
two graphics cards (refer to the picture below). Please note that although you
have installed two graphics cards, only the video outputs on the first card will
work. Hence, you only need to connect a monitor to the first PCI Express card.
NV SLI Technology
NVIDIA SLI (Scalable Link Interface) technology allows two GPUs to run in tandem
within a system to achieve up to twice the performance of a single graphics card. To
utilize this technology, the two GPU cards must be connected by an SLI Video Link
card.
SLI Video Link Card
SLI Video Link Card
Important
1. The photos shown in this section are for demonstration only. The appearance
of your mainboard may vary depending on the model you purchase.
2. If you intend to install TWO x16 graphics cards, make sure that these two
graphics cards are of the same brand and specifications.
3. Make sure that you connect an adequate power supply to the power connec-
tor on the graphics card to ensure stable operation of the graphics card.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the MSI K9N SLI V2 Series and is the answer not in the manual?

MSI K9N SLI V2 Series Specifications

General IconGeneral
BrandMSI
ModelK9N SLI V2 Series
CategoryMotherboard
LanguageEnglish

Related product manuals