2-13
Hardware Setup
Serial ATA Connector: SATA1~6
This connector is a high-speed Serial ATA interface port. Each connector can con-
nect to one Serial ATA device.
Floppy Disk Drive Connector: FDD1
This connector supports 360KB, 720KB, 1.2MB, 1.44MB or 2.88MB floppy disk drive.
FDD1
SATA3/SATA1
SATA4/SATA2
SATA5
SATA6
Important
1. Please do not fold the Serial ATA cable into 90-degrees angle. Otherwise,
data loss may occur during transmission.
2. SATA5 & SATA 6 support AHCI mode and RAID mode only.
To Next Page
Loading...
