2-22
MS-7374 Mainboard
2. After the hardware installation is completed, restart the system and install the NV
SLI driver/utility. A configuration panel will be provided for SLI control. Select the
Enable SLI technology (recommended) item to enable the SLI function for the
onboard graphics cards (concerning the details of SLI settings, please refer to
your graphics card manual) .
3. Restart your system and a pop-up message will show in the system tray confirm-
ing the SLI has been enabled.
Important
If you want to remove one graphics card and quit the SLI function, make sure
the "SLI" function is disabled.
Select “Enable
SLI technology
(recommended)”
To Next Page
Loading...
