To Next Page

To Previous Page

3-14 3-15

How to Get Started

Wired LAN

Use cables to connect to the Internet. Before setting up the connection of Dynamic IP/

PPPoE or Broadband (PPPoE) or Static IP, contact your Internet Service Provider (ISP) or

network administrator for assistance of setting up Internet connection.

▶ Dynamic IP/PPPoE Connection

1. Open up [Settings], find and click [Network & internet].

2. Select [Ethernet] within the [Network & internet] selection menu.

3. The [IP assignment] and [DNS server assignment] are automatically set as

[Automatic (DHCP)].

▶ Static IP Connection

4. Follow the previous steps 1 to 2 to continue.

5. Click [Edit] of [IP assignment].

6. Select [Manual].

7. Switch the [IPv4] or [IPv6] on. (Contact your Internet Service Provider or

network administrator for assistance of the configurations.)

8. Fill the IP address, Subnet mask, Gateway, Preferred DNS, and Alternate DNS.

Then click [Save].

Questions and Answers:

Need help?

Do you have a question about the MSI Leopard GP66 and is the answer not in the manual?

MSI Leopard GP66 Specifications

General