MSI LIQUID COOLING Series User Manual

Questo manuale d’istruzione è fornito da trovaprezzi.it. Scopri tutte le offerte per MSI GeForce RTX 4090 Suprim
Liquid 24G o cerca il tuo prodotto tra le migliori offerte di Schede Grafiche

MSI LIQUID COOLING Series Specifications

General

Series	LIQUID COOLING
Fan Size	120mm
Connector	4-Pin PWM
Radiator Size	240mm, 360mm
Fan Speed	500 - 2000 RPM
Air Flow	21.63 ~ 78.73 CFM
Compatibility	Intel LGA 1150/1151/1155/1156/1366/2011/2011-3/2066, AMD AM4

Summary

Liquid Cooling Series Installation Guide

Safety and Warnings

Operational Safety Precautions

Warnings regarding system heat and preventing GPU damage during installation.

Environmental Compliance Notice

Information on the EU WEEE Directive for electronic equipment disposal.

SUPRIM LIQUID Installation - Part 1

Step 1: Case Preparation

Turn off power, disconnect cable, and open the computer case.

Step 2: Expansion Bracket Removal

Remove necessary expansion brackets for graphics card placement.

Step 3: Graphics Card Insertion

Place the graphics card directly over the PCI EXPRESS slot.

SUPRIM LIQUID Installation - Part 2

Step 4: Securing the Card

Carefully insert the card fully into the slot and secure with a bracket screw.

Step 5: Radiator Alignment

Align the graphics card's radiator to the computer case ventilation holes.

Step 6: Radiator Mounting

Secure the radiator to the computer case using the supplied screws.

SUPRIM LIQUID Installation - Part 3

Step 7: Power Connector

Connect the required 16-pin power connector to the graphics card.

Step 8: Finalizing PC Assembly

Close the case, reconnect the power cable, and power on the PC.